To change the DEFAULT DC and number of DC's that your EDI orders 'bounce' to
Open Prima Admin and go to General>EDI Default Settings....


For Essendant

  • Enhanced ADOT - will fill from home facility plus 2 adot facilities (it can check up to 7 additional adot facilities if assigned, but will only fill from 2 adots)
  • Regular ADOT - will fill from home facility plus 1 other adot facility
  • No ADOT  - will only fill from home facility


For SP Richards:

  • Use all Zones - will check and fill from all facilities (nearest first)
  • Do not Bump - will fill from selected DC only
  • Parcel Depth Zones 2-6 will fill from the facilities in these zones - note this depends on the zip code and SP Richard's 'sprinter table' so you need to ask them which zone to set for a particular zip code and the required number of DC's


To change DC on ONE purchase order

You can override the settings by clicking the EDI Override button in the PO header tab...


For Essendant

Set the ADOT Method to 'No ADOT', the Alternative DC to the DC you want to send to and uncheck ZipCode Override (NED) as below....



For SP Richards

Set the Auto Route to 'Send to selected DC', Requested to the DC you want to send to, Ship Complete to option 2 (for standard or Wrap & Label) or option 3 (for Drop Ship) and the Parcel Zone Depth to 'Do Not Bump' as below....